Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

某美食城性能化防火设计研究

针对某美食城防火分区面积过大、疏散距离过长和钢结构防火保护的问题,提出了性能化防火设计。设定火灾场景,模拟各部分人员的疏散时间;以FDS软件模拟烟气运动,得到可用疏散时间,经过分析,各场景下均能安全疏散。采用经验公式计算和FDS模拟分析两种方法计算火灾环境中钢构件的温度,提出了钢结构的保护方案。     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

相控阵天线关键技术发展趋势

相控阵天线必然朝着降低成本和提高性能的趋势发展,因此从以下几个方面分析其关键技术的发展方向:增加带宽,提高T/R组件的附加功率效率,移相器技术,数字化电路,以及引入稀布阵技术等。对相控阵技术的需求也是对这些相关技术发展的一种重要的推动力。     

弹道导弹防御中多目标拦截的策略

多目标拦截是弹道导弹防御的重大难题,也是目前美国导弹防御系统所遇到的最大的技术难点。在将多目标问题分为单弹头攻击和多弹头攻击2类问题的基础上,结合美国的相关研究计划,分别针对核爆炸防御、助推段防御、先进的目标识别器和多拦截器防御等多目标拦截策略进行了分析研究。     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

钛酸铅晶体反铁电相至电场感应铁电相相变的研究

仔细研究了PbTiO3电场感应铁电相的晶体结构。在初始反铁电相中,各离子位移方向与极轴垂直,但在外电场感应下,Pb离子沿极轴方向有相同方向0.17的位移,从而使晶体呈现铁电相特征,发生反铁电-铁电相变。此铁电相称之为电场感应铁(EFI)电相。通过结构对称性分析,确定EFI铁电相的对称性是C2mm(C2v),用极矢量Ps作为序参量来描述相变时对称性的变化是合适的。     

钢丝绳隔振器冲击特性试验研究

采用气缸式冲击模拟台对钢丝绳隔振器进行了冲击特性试验研究,介绍了试验系统及测量方法。在比较符合舰船实际冲击环境的情况下,获得了钢丝绳隔振器压缩和拉伸方向完整的特性曲线。试验结果分析表明,钢丝绳隔振器表现出明显的冲击软化现象,其冲击刚度特性小于静刚度和动刚度,而且它具有大阻尼耗能特性,是比较理想的抗冲元件。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。